0216 577 22 34[email protected]
TEK-FLEX PANEL ADHESIVE
Adhesives

TEK-FLEX PANEL ADHESIVE

Modified Polymer

TEK-FLEX PANEL ADHESIVE is a permanently flexible, high-viscosity panel adhesive and sealant based on modified polymer and polyurethane.

Packaging600 ml aluminum foil sausage, 20 per carton
StorageUp to 12 months, stored on wooden pallets in a dry, cool place between +10 °C and +25 °C.

Features

  • Permanently flexible
  • Paintable with various paints (a prior test is recommended)
  • High UV resistance
  • High viscosity: does not sag on vertical surfaces
  • Non-tacky surface, no shrinkage
  • Easy to apply and tool with a sausage gun
  • Meets CE requirements for facade applications per EN 15651
  • Meets LEED EQc4.1 (SCAQMD 1168) VOC and French VOC A+ emission requirements

Applications

  • In curtain wall and compact, ceramic and glass applications
  • At aluminum and metal joints
  • In vehicle and caravan manufacturing
  • In the manufacture and installation of air-conditioning and ventilation ducts
  • At concrete and PVC joints
  • At pipe joints and gutters on roofs
  • Wherever water, gas, air and dust tightness is required

Technical specifications

Chemical baseModified polymer and polyurethane
FormHigh-viscosity paste
Density1.09 ± 0.04 g/ml
Skin-over time~40 min (23 °C, 50% RH)
Cure rateMin. 3 mm/day
Sag (EN ISO 7390)0 mm
Temperature resistance-40 °C to +90 °C
Application temperature+5 °C to +40 °C
Shore A hardness~45
Elongation at break (ISO 37)≥ 320%
Tensile strength (ISO 37)> 2.7 N/mm²

Application

  1. Surfaces must be dry, clean and free of dirt; non-porous surfaces should be cleaned with solvent.
  2. Cut the cartridge tip, attach a nozzle cut at a suitable angle and open the aluminum cap.
  3. Apply without trapping air; after the joint is filled, tool it with a spatula or finger.
Please note
  • Do not apply below +5 °C or above +40 °C. Do not apply to frozen or wet surfaces or standing water. Do not apply over curing silicones.
  • Minimum joint depth 6 mm. Expansion and contraction must not exceed 25% of the average joint width.
Information and quote

Get a quote for TEK-FLEX PANEL ADHESIVE

Fill in the form for product selection, technical information and pricing; we will get back to you shortly.

Call now0216 577 22 34 E-mail[email protected]

Quote form

Fill in the form and we will get back to you shortly.

Scroll to Top