General features

Fi-X EXPERT FAST EXTREME is an assembly adhesive with extra professional quality, produced with special strength-enhancing technology (POWER-BOOST TECHNOLOGY), has instant adhesion when applied and has remarkable mechanical values ​​after curing. It is a single component, elastic, MS polymer based product.

FEATURES

• Very high initial adhesion
• Concrete, marble, ceramic, tile, wood, glass, styrofoam (XPS), PVC, polyester, plywood, aluminum, iron, stainless steel, metal plate, copper, etc. Provides excellent adhesion to many substances
• Provides very high adhesion to wet and damp surfaces
• Easily applicable even at low temperatures
• Does not sag on vertical surfaces
• It has excellent mechanical properties after curing, it has a carrying capacity of 430 kg per 10 cm².
• Environmentally friendly: Free of solvents, isocyanates and silicone
• Chemically neutral, odorless and non-corrosive
• Does not stain the surface
• Can be painted with many paints (Solvent-based paints and varnishes are not recommended.)
• Suitable for internal and external applications, resistant to aging, water and UV.

Chemical Resistance

• High against aliphatic solutions, mineral oils, dilute inorganic acids and bases
• Low against aromatic solutions, concentrated acids and carbohydrates

FIX Fast & Extreme – uk

FI-X_EXPERT- FAST&EXTREME MSDS

AREA OF USE

• Bonding of many heavy materials without pre-fixation
• Used for elastically bonding parts that may be exposed to vibration.

APPLICATION

The material should be applied to the surface in dots or lines. There should be air passage in between. The joint surface must be clean and dry, free of free particles, dust, rust, oil and other foreign substances.

The object must be adhered to the surface within 15 minutes at the latest after Fi-X Expert is applied.