FEATURES

• It provides success with the same values as thiokol (polysulfide sealant) in double glass / Isicam applications.
• It does not flow on vertical surfaces.
• It cures at 20 ° C to 25 ° C.
• It provides excellent adhesion to all types of PVC in processed or raw glass, plastic and metals, ceramics, varnished wood, polycarbonate and insulating glass applications.
• It has very high characteristic values.
• Resistant to weather conditions such as rain, snow, extreme temperatures
• It is resistant to chemicals.
• It is resistant to UV, does not cause corrosion.

Tekasil T – uk

TEKASİL T-MSDS – uk

AREA OF USE

It is used as a secondary adhesive in insulating glass production.
Recommended where UV rays are particularly high.
It is used with all kinds of metal, wood, polycarbonate, PVC, plastic.

APPLICATION

Clean the surface to be treated, clean, free from oil and dust.
must be. There is absolutely no foreign substances on the surface
must be.

Preparation of the joint and cartridge:

• If it is desired to get better results from the application,
  masking tape should be pulled.
• PRIMER KVZ 16 for better results on rough surfaces, water
  PRIMER KVZ 12, on plastic surfaces
  It is recommended to use PRIMER LF to increase the adhesion strength.
  is available.
• Cutting the tip of the cartridge in accordance with the width of the joint
  must.
• The silicon should be applied uniformly, evenly and continuously.
• At the end of the tightening process, the surface should be washed with a suitable substance or soapy It should be smoothed with a finger.
• Masking tape must be removed before the silicone dries.
• Hand tools with newly squeezed silicone over the edges, TEKAFIN
  with a cleaner, frozen silicone mechanical methods, TEKAPURSIL S
  or with APURSIL cleaner.