PROPERTIES

TEKAPUR Universal foam guarantees good heat and sound insulation. It
adheres to most building materials like wood, concrete, brick, metal,
aluminium, but not to polyethylene, silicone and PTFE.

USE

It is used in building industry for sealing, filling, insulating, fixing, installing
and mounting (windows and door frames).

Tekapur universal foam TDS – uk

TEKAPUR UNIVERSAL FOAM MSDS (S3)

CERTIFICATES

APPLICATION

Surfaces should be clean, free of dust, grease and other impurities. Dry and porous surfaces should be moistened with water. The optimal temperature of can at work is 20−25°C. At lower temperature put the can into warm water (max. T=40°C) for about 20 minutes. Before use shake can thoroughly (about 20 times) with the valve upside down. Remove the protective cap and screw the adapter. Hold the can upside down and activate the foam by pressing the valve. Gaps should be filled only partially, as the foam expands 2−3 times its original volume. If you are filling a gap wider than 5 cm, work in layers. Apply the second layer once the first one has hardened. You can speed up the process  of hardening by spraying the foam with water. Once the foam has hardened, cut it with a sharp knife and finish with plastering, covering, painting,… If you  do not use the entire can, clean the valve with the TEKAPUR cleaner or acetone. Hardened foam can be removed with the APURSIL cleaner or mechanically. Cured foam must be protected against UV.